Brake module corrosion continues to vex Daimler Truck

Third recall for same issue brings total of recalled units to more than 475,000

Daimler Truck North America is recalling about 77,000 trucks in the U.S. and Canada for the same brake modulator issue that led to two earlier recalls. (Photo: Jim Allen/FreightWaves)

Daimler Truck North America is conducting a third safety recall – about 77,000 vehicles across seven model years in the U.S. and Canada – for brake module corrosion that could cause pulling to one side of the road, which could raise the possibility of a crash.

None of the three recalls involving more than 475,000 units has a crash associated. A miniscule number of vehicles have exhibited the condition among the number built between June 2016 and March 2022

Miniscule number of trucks in recall expected to exhibit issue

Less than 1% of the recalled models are likely to exhibit the condition. They are:

2022 Freightliner 114SD

2017-2023 Freightliner Cascadia

2022-2023 Western Star 47X

2022-2023 Western Star 49X

The latest recall reported on the National Highway Traffic Safety Administration website involves modules on vehicles with standard cruise control. Daimler told NHTSA it did not think those models had the condition. The first two recalls involved trucks with adaptive cruise control (ACC) that slows down and speeds up based on a driver’s setting.

In all three recalls, chemical corrosion could affect the functionality of the brake modulator valve. All braking force could apply to one front wheel end during braking by automated roll stability control or other non-driver initiated braking. That could result in a sudden change in vehicle direction due to uneven braking on the front axle. Regular service brakes do not have the condition.

Drivers may observe an antilock brake malfunction light prior to complete chemical corrosion contamination of the modulator valve.  

One report of brake pull of non-adaptive cruise control model

Daimler had looked for cases of non-adaptive cruise control models exhibiting the brake pull condition since September. It received a report from a driver in October. A controlled test in February found the possibility of a sudden unexpected brake pull during rare conditions with electronic stability control or rollover stability control activated.

“Out of abundance of caution, DTNA decided to initiate a new voluntary safety recall [covering] all vehicles equipped with painted and unpainted front brake modulator valves, covering the separate population that are not equipped with ACC,” the company said in its Feb. 10 NHTSA filing.

Affected vehicles will receive two front anodized modulator valves, one each for the left and right. Repairs will be conducted in phases based on vehicle locations. Repairs will be performed by DTNA authorized service facilities. Dealers and customers will be notified by first-class mail by April 10.  

The earlier recalls in July 2020 and November 2022 involved about 183,000 and 218,000 vehicles respectively.

Daimler recalls 218,468 trucks for possible corrosion of brake module

Feds fine Daimler Trucks $30M for slow recall reporting

Daimler Trucks recalling nearly 183,000 Freightliner Cascadias

Click for more FreightWaves articles by Alan Adler.

Upcoming FreightWaves Events
Compliance

Brokerage Compliance Symposium

The day before F3. Every compliance issue you face - fraud exposure, carrier liability, FMCSA rules, cargo theft, insurance gaps - navigated by attorneys and operators defining best practices in a changing industry.

October 26, 2026
The Signal at Chattanooga Choo Choo • Chattanooga, TN
Register Now
Awards

F3 Awards Dinner

The night before F3. FreightTech100 companies honored. FreightTech 25 and Shipper of Choice winners revealed live. Cocktail reception into dinner and live music - 300 industry leaders in one purpose-built room.

October 26, 2026
The Signal at Chattanooga Choo Choo • Chattanooga, TN
Register Now
FreightTech

F3: Future of Freight Festival

Industry-defining keynotes, rapid-fire technology demos, and industry leaders networking in experiences across Chattanooga - plus the inaugural F3 Awards Dinner featuring the FreightTech and Shipper of Choice reveals.

October 27, 2026 – October 28, 2026
The Signal at Chattanooga Choo Choo • Chattanooga, TN
Register Now
Compliance Brokerage Compliance Symposium Oct 26 • The Signal at Chattanooga Choo Choo • Chattanooga, TN

The day before F3. Every compliance issue you face - fraud exposure, carrier liability, FMCSA rules, cargo theft, insurance gaps - navigated by attorneys and operators defining best practices in a changing industry.

The Signal at Chattanooga Choo Choo • Chattanooga, TN Register Now
Awards F3 Awards Dinner Oct 26 • The Signal at Chattanooga Choo Choo • Chattanooga, TN

The night before F3. FreightTech100 companies honored. FreightTech 25 and Shipper of Choice winners revealed live. Cocktail reception into dinner and live music - 300 industry leaders in one purpose-built room.

The Signal at Chattanooga Choo Choo • Chattanooga, TN Register Now
FreightTech F3: Future of Freight Festival Oct 27 – Oct 28 • The Signal at Chattanooga Choo Choo • Chattanooga, TN

Industry-defining keynotes, rapid-fire technology demos, and industry leaders networking in experiences across Chattanooga - plus the inaugural F3 Awards Dinner featuring the FreightTech and Shipper of Choice reveals.

The Signal at Chattanooga Choo Choo • Chattanooga, TN Register Now

Alan Adler

Alan Adler is an award-winning journalist who worked for The Associated Press and the Detroit Free Press. He also spent two decades in domestic and international media relations and executive communications with General Motors.